Should I use the electrodes and the light and the sound all together?
How do I choose which hardware to use for energetic balancing?
Which waveform should I use?
I heard that I should use a pause between the different frequencies. Why?
What frequencies can animals hear?
What is plasma?
Should I use Biofeedback or Resonant Frequencies Mode?
Q: Should I use the electrodes and the light and the sound all together?
A: Ideally, if you have time, you would use only one form of energy to transmit the frequencies. One of the principles when working with the Inergetix-CoRe System is to use as much as necessary but as little as possible – this applies to items included in the broadcasts as well as to the duration and frequency of repetition of the balancing. But you can of course use different forms of energy together – any of the hardware that is connected will transmit the frequencies, so if you don’t want to use one form you can simply disconnect it.
back to top
Q: How do I choose which hardware to use for energetic balancing?
A: Different people resonate to different forms of energy – for example, a ‘magnetic’ personality may resonate best with magnetism; a ‘sunny’ personality may resonate best with light. There are some conditions that should not be approached using electricity or light, and we have information on these in our User Guide.
Also, different conditions respond better to work with electrodes rather than with light – these would be issues such as spasms, muscle pain or stiffness, cramping, stiffness of joints.
It is uncertain but possible that the electricity from the electrodes travels along meridians, in which case it can directly affect body organs.
The far infrared radiation (FIR) that the gases in the plasma generator naturally emit stimulates cell growth and repair. It was with light that Royal Rife had his greatest successes.
back to top
Q: Which waveform should I use?
A: The square wave form is considered to be the most effective because it has the greatest transmission of higher harmonics, which means that for any one frequency selected, higher and lower frequencies are also broadcast. By contrast, if you choose a sine wave you will only receive the selected frequency – no higher or lower harmonics. All the frequency generator settings in CoRe’s different modes can be changed, but you will see that all of them except Relaxation Mode use the square wave form. Relaxation Mode uses the sine wave because it has a softer sound that is more relaxing. The plasma generator requires that you use square wave.
back to top
Q: I heard that I should use a pause between the different frequencies. Why?
A: A pause between the different frequencies helps the body to know which frequency you mean – for example, for one second you mean 100 Hz and then after a pause for another one second you mean 440 Hz. An analogy is that the pause functions like a period between two sentences – if you run the two sentences together without the period, your meaning may be unclear.
back to top
Q: What frequencies can animals hear?
A: When you are working with animals, consider that dogs hear in the range 15 Hz – 50,000 Hz, and cats hear 60 Hz – 65,000 Hz. Because humans do not hear the same range, you might want to keep the volume low; the benefit is there even if the sound is not audible.
back to top
Q: What is plasma?
A: Plasma is a form of matter that starts out as a gas and then becomes ionized and consists of free moving ions and electrons. It exhibits different properties than gas, liquid, or solid; it obtains these properties by taking on an electrical charge.
back to top
Q: Should I use Biofeedback or Resonant Frequencies Mode?
A: Usually I would suggest either disease-specific or biofeedback mode; generally you would use the resonant frequencies mode only if you want to see which frequencies actually resonate and then if you have the necessary experience with what the frequencies indicate to select the appropriate ones for energetic output - so it is more manual and more an advanced mode.
Biofeedback mode is short-term mode; it's automatic, simple, and fast. Resonant frequencies mode is long-term mode; more stable and precise. An analogy to demonstrate the difference between biofeedback and resonant frequencies modes is that the picture in biofeedback mode is like a frame from a movie - because the movie is dynamic the frame has less resoluation and is a little bit out of focus; the picture from resonant frequencies mode is more like a still camera shot, with much better resolution and focus.
In biofeedback mode, the only frequency broadcast is the single most resonant frequency, and when that's been broadcast then the system checks again to find the single most resonant frequency, and it broadcasts that one - this scan-broadcast loop continues as long as the settings allow.
The disease-specific mode does not check for resonance; the frequencies listed are those that have been found effective for the associated condition/disease during the past 50 years of research in the field. The listed frequencies may not be resonant for the client's condition.
If you want to informationally broadcast frequencies, then you will have to copy them from the table in the resonant frequencies mode.
back to top
*To avoid misinterpretation of words such as energy-medicine, informational-medicine, treat, cure, diagnose, illness, disease, remedy and spiritual healing please study our Vision & Mission and Disclaimer pages carefully. CoRe System users in the USA are required to read and accept these interpretations.
Top ↑© 2007-2011, Inergetix, Inc. All Rights Reserved
|
Vision & Mission
Support
