Should I be emotionally involved in the process?
What do you think about retesting an item which comes up from an Inergetix-CoRe test, with another method for confirmation? Or about the opportunity to do some other kind of test (if one knows any) for items that are suspected and the Inergetix-CoRe didn't show?
I was looking for something specific and Inergetix-CoRe didn't show it.
I think that adding a photo of my patient would add to the treatment - how can I do that?
Can I add my own remedies to the Inergetix-CoRe database?
Can we, and how do I learn to if possible, send distant treatment with the frequency aspect of the Inergetix-CoRe?
Does a power plant near my office affect the analysis?
Does it matter if I am upset, or if my patient is upset?
Can I use a supplement or herb that I can't identify?
Q: Should I be emotionally involved in the process?
A: As you might have seen elsewhere on this site, we divide observable phenomena into causal or a-causal (coincidental) phenomena. Knowledge, interpretation, ability of observation, sensitivity, intent, emotional strength, can all still be considered as part of the causal realm however subtle or neglected by contemporary science and useful in healing as one part of the equation. My experience is that with the Inergetix-CoRe System you should not and need not be emotionally involved but it is important that you have clear strategies for which symptoms you want to balance, which remedy groups of the Inergetix-CoRe System to choose, which remedies to select, and so on.
back to top
Q: What do you think about retesting an item which comes up from a CoRe test, with another method for confirmation? Or about the opportunity to do some other kind of test (if one knows any) for items that are suspected and the Inergetix-CoRe didn't show?
A: My understanding is that we humans have a great variety of channels by which we can receive information, the more different approaches you use... intellectual / emotional / tactile / energetic / simple observation.... the more holistic will be your picture of the client and his situation and the more successful will be your balancing.
back to top
Q: I was looking for something specific and Inergetix-CoRe didn't show it.
A: You can look at the contents of the group(s) that you analyzed and see if the item was included in the analysis but did not show because it has a low value. And then if the item is not in the groups you are testing, you can easily add the item to the database and run another analysis including the new item to see if it is significant.
back to top
Q: I think that adding a photo of my patient would add to the treatment - how can I do that?
A: Some practitioners find that a photograph of their client helps the analysis. It is also helpful in identifying the client in cases where certain personal information is unknown – for example some elderly people do not know their exact date of birth; with the exception of some twins, somebody’s face is unique to them and it can thus help identify somebody for whom you have incomplete personal information. Photos must be a jpeg file, in portrait format.
To add a photo to a new or existing client’s file:
- Using the name of the client as the file name for the photograph, save the photograph in the Inergetix\Clientphotos folder. Note: If you do not see a Clientphotos folder in the Inergetix folder, click File, click New, click Folder, type the name Clientphotos, press Enter, and close the Inergetix folder.
- On the General tab of the Patient Data window, select the photo from the Photo drop-down list. You will be able to see the photo on the Photo tab.
back to top
Q: Can I add my own remedies to the Inergetix-CoRe database?
A: Yes you can. With Inergetix-CoRe, this is very easy to do. The standard database contains 25,000 items, concepts, and remedies; for each individual client you can add up to 80 groups just for that client (that's up to 20,000 items just for that client), and there is no restriction on the number of groups you can add to be used for any of your clients. Each group can contain up to 250 items.
When you build your remedy trays, it is a two-step process to add a remedy directly into your tray for balancing (for example, when you know the exact concept or affirmation you want to give).
Usually you want to add items for use during analysis, and this can be done using the same two-step process, or when you have many items to enter you can work directly in an Excel spreadsheet to do this.
back to top
Q: Can we, and how do I learn to if possible, send distant treatment with the frequency aspect of the Inergetix-CoRe?
A: It is possible to broadcast frequencies carried by sound via the telephone, or broadcast over loudspeakers around a field, for instance. But generally, although there is an informational component to the energetic balancing, rather than relying on that informational component to give a frequency balancing to somebody at a distance, it is more effective to put the frequencies into a remedy tray and broadcast them informationally using the AutoTreat or Treatments windows.
There are two ways to do this. The simplest way is to simply write the number of the frequency into a custom remedy tray using the Remedy Trays window; in this case, you would simply write the number followed by Hz – eg "20,000 Hz" or "450.6 Hz" into the long text box at the bottom of the Remedy Tray window, and click Enter and Encode Your Item….
The procedure that is more helpful for longer lists that can be copied, such as you might find using the Resonant Frequencies Mode, is detailed below. Although there are several steps, if you are comfortable copying and pasting in Excel you should have no problem with this.
- Create a new sheet at the front of your client's Excel file:
Right-click the Treatments sheet and select Insert from the pop-out menu, click Worksheet and OK.
- Select the frequencies you want from the list in Resonant Frequencies Mode:
Click to select the highest frequency you want, hold down the Shift key on your keyboard and click to select the lowest frequency you want
- Copy them: Press Ctrl-C on your keyboard
- Paste them into the new sheet in Excel:
Click the upper-most cell on the left (cell A1), and click Ctrl-V
- Select the column of frequencies on the Excel sheet:
Click and drag to select all the frequencies in column A, making a mental note of how many there are
- Copy the frequencies (using Ctrl-C, or right-click/Copy)
- Paste the frequencies into a row:
Right-click the first empty cell in column A (eg, if you selected cells A1-A5, then right-click in cell A6), and click Paste Special, click Transpose and OK
- Select the row of frequencies on the Excel sheet:
Click and drag to select all the frequencies from the row of frequencies you just created, again remembering how many there are
- Copy the frequencies (using Ctrl-C, or right-click/Copy)
- Paste the frequencies into a row on the RemedyTray sheet (not the Remedy Tray window):
Right-click in column D beside the name of the tray you want to paste into (if possible, use the AutoTreat tray unless you want to save this list for future use) and click Paste
- In column C, enter the total number of frequencies you just pasted
- If you did not use the AutoTreat tray:
rename the remedy tray in column A, and then run an analysis in the DataBase window using the new group from the RemedyTray tab (so that it becomes the Last Analysis Results in the Treatments window, or is accessible by clicking the View AutoTreat RemedyTray button, which toggles back and forth displaying the contents of the last results or the autotreat tray)
- If you used the AutoTreat tray, go straight to the AutoTreat or Treatments windows and select the contents of the AutoTreat tray and proceed as usual.
back to top
Q: Does a power plant near my office affect the analysis?
A: No. Energy, wherever it comes from, affects only the energetic plane, not the informational.
back to top
Q: Does it matter if I am upset, or if my patient is upset?
A: The best state for the patient and for the practitioner is the dynamic labile equilibrium (DLE) (see elsewhere on this site for more on the DLE). In this state of openness, connections are seen that may not be seen if everything is unchanging and stable.
back to top
Q: Can I use a supplement or herb that I can't identify?
A: You can use your imagination to expand the items you can work with based on my response, even though I usually refer to a herb. When using unknown herbs and other samples/items, you don't need the biological name of the plant. If you have a sample, you can put it in a bottle (or have a picture of the item) and then write a unique name on it and use that unique name in CoRe as the identifier in a tray to analyze or balance.
Or, if you don't want to pick a live sample of a rare plant, you can describe the plant in a way that is unique as well as making it clear which plant is meant - where to find it, what it looks like, for example - 'the plant that grows at xxxplace and has xxxkind of leaves and has xxxcolor flowers at xxxtime of year and has xxx kind of xxx (describing how to find it and how to recognize it)". This is an informational system, so you can give it information; tell the system as if you are telling a person. You have up to 2000 characters available in the long text box at the bottom of the Remedy Tray window. You can add other information as a comment (such as 'herb used by voodoo doctor for skin rash').
The possibilities of the custom trays are virtually limitless, once you understand the principles of finding resonance between 'symptoms' and 'remedies'.
back to top
*To avoid misinterpretation of words such as energy-medicine, informational-medicine, treat, cure, diagnose, illness, disease, remedy and spiritual healing please study our Vision & Mission and Disclaimer pages carefully. CoRe System users in the USA are required to read and accept these interpretations.
Top ↑© 2007-2011, Inergetix, Inc. All Rights Reserved
|
Vision & Mission
Support
